i bought this 2-pack to test and see if it would be suitable for my crossbows. yep, more than enough! i would only suggest that they add a better quality set of drywall anchors. the ones that came with them are very thin and 2 of them just kept crushed when putting them in the wall.
if you’re hanging it on drywall, you’re going to have to go and buy your own anchors and screws. the ones that come with the hangers don’t work at all. i don’t know how you sell a product with the wrong screw/anchor hardware.
i don't think it would be too hard to make this work, but there's multiple flaws here. first of all the middle screw has no point to it so what do you fasten that to? you have to make an extra hole with the other screws to make that work. right now it's just protruding out of the wall because i need to do that, which is extra work that isn't necessary. just make the middle screw smaller, solvedthe second thing is the actual handle to hold the guitar is wonky. not really built to fit a wider neck as the guitar i have up right now is a classical. so it kind of makes my guitar extend at an unnatural angle that draws away from the aestheticthe wood is nice and technically it works, but idk why they even put screw holders in the bundle as they're useless. also no instructions
sturdy and nice looking when screwed into stud. but the drywall anchors are a complete liability and should be thrown away immediately. had a bass fall 2ft right after installing because the screw just slides through the anchors. thankfully it was a cheap bass and didn't take much damage.
will not hold a telecaster or other electric guitars with a narrow head. can totally slide right through the prongs because they are too wide and give too much. that should be disclosed in the item description.
i think overall the product is good. easy to put up if you follow the directions, and it feels secure enough. the only downside is that it came with one faulty screw that i couldn't turn. luckily with the anchors provided, i was still able to hang it up and feel like it was sturdy with just 1 screw holding it up. for my own sanity, however, i hung my ukulele on that one, since it has the lightest weight. most likely, i will try a different product next time because of this.
when out together, it's wobbly at best.the fork portion that hold the guitar is just long screws bent and wielded together.a cheap threaded insert holds it to the wood base. seems to be decent neoprene covering on the holder, so at least not cheap surgical tubing.after assembled, it's adjustable, but wobbles horribly.not exactly confidence inspiring. i'm sure it would work ok, but i don't know. i could have put something like this together from scratch in 15 minutes in my garage. i'd hoped for something better by buying something advertised and built specifically for the purpose.not impressed.
the plastic spacers are delicate and it split as i was putting the hanger together. i didn't use excessive force. just enough force to orient the hanger in the right direction without be loose. waste of money.
the design of the guitar holder itself leaves much to be desired. the neck support, which is supposed to cradle the guitar's neck gently, is too narrow and fails to provide a snug fit for my acoustic guitar. this not only makes the guitar wobble precariously but also puts undue stress on the neck, risking damage over time.
product came opened and previously used. ordered brand new and received open box missing pieces and some pieces were damaged. clearly had been used previously it even had a screw that had already been screwed into drywall.
the screws they provide for mounting don’t “catch” the drywall anchors they provided at all.this causes a loose fit which’ll inevitably end with the mount getting ripped from the wall due to the weight of the instrument. get a different brand if you’re going to be mounting to drywall, as this does not work with the hardware provided. all i’ve got now are 2 massive drywall-anchor sized holes in my wall.
this should have been an easy installation, however because of cheap hardware this made difficulty in hanging and ensuring it was sturdy. and before you ask about the installer, my husband is a licensed contractor and knows what he is doing. used his own hardware after giving up on the stripped hardware.
挂钩不稳
尺寸不兼容
调整适配
说明不清晰
干墙锚具质量
浪费金钱
螺丝失效
螺丝孔损坏
配件错误
额外购买
额外打孔
不合适的把手设计
螺丝夹无用
干墙锚问题
螺丝滑动
尺寸不兼容
感觉廉价
塑料环易碎
损坏的螺丝
轻量级悬挂
单个螺丝稳定性
结构摇晃
叉口部分廉价
廉价螺纹插入件
调整性问题
缺乏信心
DIY简易性
购买失望
材料质量
塑料隔片易碎
窄颈支撑
稳定性不足
风险损害
产品状况
缺失零件
损坏零件
曾被使用过
螺丝不兼容
松动安装
损坏墙面
硬件质量
安装困难